image

SMPS and Battery Chargers

SMPS and Battery Chargers

Model No: PJE-120. Industrial Grade Din Rail Mounted Mains Operated Switch Mode Power Supply
Input 160 to 290VAC Output 24VDC at 5 AMP with constant Voltage constant current o/p characteristic suitable for any type of industrial load

DETAILED SPECIFICATIONS

Input Voltage Range AC:
160-290V AC
Input Voltage Range DC:
200-425 V DC.
Input Frequency:
40-60HZ.
Output voltage adjustment:
+-10%
Inrush Current:
30 Amps
Efficiency @ full load & 230 V AC Input:
> 85%
Hold-up Time:
20 msec.
Operating Temperature:
0 TO 50 DEG C
Leakage current:
<2 mA at 230 vac
Vibration:
10-500 Hz 2G 10 min/1cycle 60 mins each along XYZ axis
Protections:
Input under /over voltage
 
Output overload / short circuit (cvcc type)
 
Output over voltage
 
Thermal overload/over temperature
Line Regulation:
<1%
Load regulation:
<1%
Ripple and noise:
150 mv p-p
Isolation between:
Input & Output:
 
Input & Earth:
 
Output & Earth:
2000V AC
1500V AC
1500V AC
Dimensions:- L*B*H
  140*80*55mm
Mounting: Din rail mounting.
Weight: 500gms


Model No: PJE-75.

SMPS and Battery Chargers
Input Voltage Range AC:
160-290V AC
Input Voltage Range DC:
200-425 V DC.
Input Frequency:
40-60HZ.
Output voltage :
24VDC
Output Current:
3 AMPS MAX
Output voltage adjustment:
+-10%
Inrush Current:
30 Amps
Efficiency @ full load & 230 V AC Input:
>85%
Hold-up Time:
20 msec.
Operating Temperature:
0 TO 50 DEG C
Leakage current:
<2 mA at 230 vac
Vibration:
10-500 Hz 2G 10 min/1cycle 60 mins each along XYZ axis
Protections: Input under /over voltage
  Output overload / short circuit (cvcc type)
  Output over voltage
  Thermal overload/over temperature
Ripple and noise:
100 mv p-p
Isolation between: Input & Output:
  Input & Earth:
  Output & Earth:
3000V AC
1500V AC
1500V AC
Dimensions:- L*B*H \
  135*45*80mm
Mounting: Din rail mounting.
Weight: 400gms

 

Model No: PJE-240

SMPS and Battery Chargers

DETAILED SPECIFICATIONS

Input Voltage Range AC:
90V-135V AC
Input Frequency:
40-60HZ.
Output voltage :
24VDC
Output Current:
10 AMPS MAX
Output voltage adjustment:
+-10%
Inrush Current:
30 Amps
Efficiency @ full load & 230 V AC Input:
>85%
Hold-up Time:
20 msec.
Operating Temperature:
0 TO 50 DEG C
Leakage current:
<2 mA at 230 vac
Vibration:
10-500 Hz 2G 10 min/1cycle 60 mins each along XYZ axis
COOLING
TEMP CONTROLLED ON/OFF FAN
Protections: Input under /over voltage
  Output overload / short circuit (cvcc type)
  Output over voltage
  Thermal overload/over temperature
Line Regulation:
<1%
Load regulation:
<1%
Ripple and noise
150 mv p-p
Isolation between: Input & Output:
  Input & Earth:
  Output & Earth:
2000V AC
1500V AC
1500V AC
Dimensions:- L*B*H \
  170*95*95mm
Mounting: Din rail mounting.
Weight: 1500gms


Model No: PJE-400

SMPS and Battery Chargers

Input 160 to 290VAC Output 48VDC at 6AMP with constant Voltage constant current o/p characteristic suitable for any type of industrial load

DETAILED SPECIFICATIONS

Input Voltage Range AC:
160-290V AC
Input Voltage Range DC:
200-425 V DC.
Input Frequency:
40-60HZ.
Output voltage adjustment:
+-10%
Inrush Current:
30 Amps
Efficiency @ full load & 230 V AC Input:
>85%
Hold-up Time:
20 msec.
Operating Temperature:
0 TO 50 DEG C
Leakage current:
<2 mA at 230 vac
Vibration:
10-500 Hz 2G 10 min/1cycle 60 mins each along XYZ axis
COOLING
TEMP CONTROLLED ON/OFF FAN
Protections:
Input under /over voltage
 
Output overload / short circuit (cvcc type)
 
Output over voltage
 
Thermal overload/over temperature
Line Regulation:
<1%
Load regulation:
<1%
Ripple and noise
200 mv p-p
Isolation between: Input & Output:
  Input & Earth:
  Output & Earth:
2000V AC
1500V AC
1500V AC
Dimensions:- L*B*H \
  160*115*85mm
Mounting: Din rail mounting.
Weight: 1000gms

Model No: PJE-BC100


Battery charger For Engine Start Applications Suitable for charging 12v –60ah, 12v-90ah battery

DETAILED SPECIFICATIONS

Input Voltage
150-300vac
Output voltage: Float Mode:
  Boost mode:
13.4 V DC.
13.9 to 14 V DC
Inrush Current:
Limited by NTC thermister
Charging current in boost mode:
6 amps
Charging current in float mode:
0 to 2.5 amps
Operating Temperature:
0 to 50 DEG C
Leakage current:
<2 mA at 230 vac
Vibration:
10-500 Hz 2G 10 min/1cycle 60 mins each along XYZ axis
COOLING
TEMP CONTROLLED ON/OFF FAN
Protections: Input under voltage – cutoff level 140 VAC. Turn on voltage 160 VAC
  Input over voltage – 325 V AC units shuts off if voltage goes above this value
  Output over voltage ( Batt Charger included) – 15.5 V DC
  Output short circuit and overload – continuously protected
  Thermal Shutdown – protected latching mode
  Battery reverse polarity – protected both on line and off line
Current drawn by charger from battery:
Draws zero current from the battery under any circumstances
Externally Induced Over voltage:
Protected against output overvoltage caused by parallel connection of alternator etc
Annunciation:
Potential free NO /NC contact for charger On/ Fail indication
Indication:
Mains On, Float, Boost, and Battery Reverse
Line Regulation:
<1%
Load regulation:
<1%
Ripple and noise
150 mv p-p
Isolation between: Input & Output:
  Input & Earth:
  Output & Earth:
2000V AC
1500V AC
1500V AC
Dimensions:- L*B*H
  170*110*60mm
Mounting: Wall mounting type
Weight: 1000gms

 

Model No: PJE-BC 150


Battery charger For Engine Start Applications Suitable for charging 12v –60ah, 12v-90ah battery

DETAILED SPECIFICATIONS

 

nput Voltage
150-300vac
Output voltage: Float Mode:
  Boost mode:
13.4 V DC.
13.9 to 14 V DC
Inrush Current:
Limited by NTC thermister
Charging current in boost mode:
10 amps
Charging current in float mode:
0 to 4 amps
Operating Temperature:
0 to 50 DEG C
Leakage current:
<2 mA at 230 vac
Vibration:
10-500 Hz 2G 10 min/1cycle 60 mins each along XYZ axis
COOLING
TEMP CONTROLLED ON/OFF FAN
Protections: Cutoff level 140 VAC. Turn on voltage 160 VAC
  300 V AC units shuts off if voltage goes above this value
  Output over voltage ( Batt Charger included) – 15.5 V DC
  Output short circuit and overload – continuously protected
  Thermal Shutdown – protected latching mode
  Battery reverse polarity – protected both on line and off line
Current drawn by charger from battery:
Draws zero current from the battery under any circumstances
Externally Induced Over voltage:
Protected against output overvoltage caused by parallel connection of alternator etc
Annunciation:
Potential free NO /NC contact for charger On/ Fail indication
Indication:
Mains On, Float, Boost, and Battery Reverse
Line Regulation:
<1%
Load regulation:
<1%
Ripple and noise
150 mv p-p
Isolation between: Input & Output:
  Input & Earth:
  Output & Earth:
2000V AC
1500V AC
1500V AC
Dimensions:- L*B*H
  170*110*85mm
Mounting: Wall mounting type
Weight: 1200gms

 

Model No: PJE-BC 240


Battery charger For Engine Start Applications Suitable for charging 12v –60ah, 12v-90ah battery

DETAILED SPECIFICATIONS

 

Input Voltage
170-270vac
Output voltage: Float Mode:
  Boost mode:
26.2 V DC.
27.4 to 28 V DC
Inrush Current:
Limited by NTC thermister
Charging current in boost mode:
10 amps
Charging current in float mode:
0 to 3.5 amps
Operating Temperature:
0 to 50 DEG C
Leakage current:
<2 mA at 230 vac
Vibration:
10-500 Hz 2G 10 min/1cycle 60 mins each along XYZ axis
Protections:
Cutoff level 140 VAC. Turn on voltage 160 VAC
 
300 V AC units shuts off if voltage goes above this value
 
Output over voltage ( Batt Charger included) – 15.5 V DC
 
Output short circuit and overload – continuously protected
 
Battery reverse polarity – protected both on line and off line
Current drawn by charger from battery:
Draws zero current from the battery under any circumstances
Externally Induced Over voltage:
Protected against output overvoltage caused by parallel connection of alternator etc
Annunciation:
Potential free NO /NC contact for charger On/ Fail indication
Indication:
Mains On, Float, Boost, and Battery Reverse
Line Regulation:
<1%
Load regulation:
<1%
Ripple and noise
150 mv p-p
Isolation between: Input & Output:
  Input & Earth:
  Output & Earth:
2000V AC
1500V AC
1500V AC
Dimensions:- L*B*H
  190*155*75mm
Mounting: Wall mounting type
Weight: 1500gms


Model No: PJE-BC 500

24V-10 Amperes Suitable for Charging 24Volts 100/130/180AH Batteries

DETAILED SPECIFICATIONS

Input Voltage Range AC:
170-280V AC
Input Voltage Range DC:
270-425 V DC.
Input Frequency:
40-60HZ.
Ourput voltage: a) float mode ---------- 26.4VDC
  b) boost mode--------- 28.0vdc
Ourput current: a) float mode ---------- 0-5 amp max
  b) boost mode--------- 5 to 20 amps max ( cvcc mode)
Inrush Current:
30 Amps
Efficiency @ full load & 230 V AC Input:
> 85%
Hold-up Time:
20 msec.
Operating Temperature:
0 to 50 DEG C
Surge and noise immunity:
as per IEC 61000-4-5
Protections: Short Circuit and overload: Continous Protection CVCC Mode
  Input undervoletage Voltage level 150V AC
  Outpur overvolatage : Shutdown at 300V AC, Whitstands 440V AC, Automatic turn on at 280V AC
  Thermal Shutdown : Protected Shutdown Type
  Output Overvoltage : Protected Against Power Supply Induced Overvoltages
  Battery Reverse Polarity : Protected Both on line and off line.
Leakage current:
<2 mA at 230 vac
Vibration:
10-500 Hz 2G 10 min/1cycle 60 mins each along XYZ axis
Annunciation:
Potential free NO /NC contact for charger On/ Fail indication
Indication: Mains On
Float
Boost
Battery Reverse
Line Regulation:
<1%
Load regulation:
<1%
Ripple and noise
150 mv p-p
Isolation between: Input & Output:
  Input & Earth:
  Output & Earth:
2000V AC
1500V AC
1500V AC
Dimensions:- L*B*H
  195*130*160mm
Mounting: Panel Mounting
Weight: 2.5 KG