image

Static Eliminator and Bars

Voltage Monitoring Relays

What is Static ?
Static is stationery electric charge, which forms on the surface of non-conduction ( Insulators ) and un-grounded isolated conductors. Friction pressure and separation are the main reason for creation of static. If two materials come in contact with each other and then separated, electronics may be transferred from one to other. A charge in temperature also create charge. Static electricity is thus the imbalance of positive and negative charges. When a moving web comes in contact with a rubber, steel or aluminium roller and separated from it, static electricity gets created on web both web and the roller. Bare films, paper and rubber roller being non-conductive, there is no free flow of electrons. Thus the static charge on films and paper dissipate very slowly. Metals roller are foils being conductive allow free flow of electrons to ground, since they are invariability earthed conductors will develop a static charge if they are insulated from ground. The magnitude of the static charge will depend on the materials, applied forces, separation rate, temperature and relative humidity.

 

What is a Static Eliminator ?
A static eliminators, as the name imply is a device or tool that is used to neutralize and restore the electrical balance in a wide range of industrial applications like cleaning dust and getting rid of materials that stick to products. You can also do away with unwarranted accident from hazardous shocks and sparks that are generated due to static charges.

 

Industries Using this Technology
Plastic Processing: Foil processing, packaing machines, foil extruders etc. Textile Industry: Weaving and spanning mils, textile, finishing plants etc. Graphic Industry: Screen and tampon printing machines, photographic and film processing machines folding machies etc. Painting / Sprying works hops: Car painting / spraying, painting / spraying of plastic components etc.

 

Static charge is an excellent means of temporarily bonding materials.
Static charges can be used to stick BOPP / PP / polystyrene foil material to the inner mold surface during injection molding, a procedure which greatly improves finished product quality. The Foil will not slip or change position in the mold due to charging.

Decorate you Injection Molded Product to look more charming a multi color foil on Plastic Items like Thermo ware products, Casseroles, Tiffin, Water Jug, Tray, Glass, Coasters, Mug, Lunch Box, Compass Box, Water Bag, Bucket, Tumbler, Icepail and many other household, advertising and gift items which can be Injection molded.

 

Benefits :
■ Easy to install
■ Accurate output power
■ Small, compact and economical design,
■ Low maintenance
■ User friendly
■ Maximum operator safety
■ Efficient Charging

 

Features :
■ Rugged powder coated metal box
■ Hermitically sealed epoxy Transformer
■ Plug and Socket Static charger handle
■ Light weight charger handle


Specification:

■ Input power : 230 V AC 50 HZ .single phase
■ Output Voltage : 7 Kv
■ Power Consumption : 20 Watts.
■ Dimensions : 225 mm x 135 mm x 150 mm.
■ Weight : 5.5Kg

 

Application:
■ Foil Charging in Injection Molding and Blow Molding Machines, FFS packaging machines

 

Static Eliminators

Static Eliminators Bars


Circular Static Eliminator
The digital systems circular static eliminator electrode is highly suitable for installation on vertical form and fill machinery the system provides 360" ionization and helps in eliminator the static on the entire surface of the material being fill. Controlling the static charge help in eliminating entrapment of filed material in the seal area of the bag and avoids unsightly “static cling” of the fill material to the inside of the bag. We manufacture circular version with internal diameters ranging from 30 mm to 350 mm. These are used in application where 350 neutralization is required such as plastic pipe extrusions, vertical from fill packaging machines, textile silver etc.

 

Circular Eliminator avialable in the size

Sr.
OD
ID
PCD
1
130
30
106
2
135
35
111
3
170
70
146
4
190
90
166
5
210
110
186
6
230
130
206
7
250
150
226
8
260
160
236
9
270
170
246
10
290
190
256
11
310
210
286
12
330
230
296
13
350
250
306
14
370
270
316
15
400
300
326

 

Features
■ Two high voltage connector parts, for valence static eliminating bars
■ More parts can be provided on request
■ Static high voltage output with current limit
■ Compact dust proof and rugged construction
■ Data cable three pin plug with 2 meter cable for phase, neutral and earth
■ Built-in fuse and power switch
■ Easy installation and commissioning
■ Very low power consumption

 

Static Control Application area

Packaging
Scratch & Shrink wrapping Slider packing foam fill seal, Canning, Bolting
Converting

Printing presses, Coating, Laminating, Slider, Salvage winder sheeting, Pouching bag making etc.

Paper and Board
Pope reel, Coating, Calendaring, Salvage wider, Sheeting Corrugated
Plastic Filters
Cast film line, Blown film line, Slider, Sheeters
Printing and Binding
Ravage flees, Offset screen, L able printing blasting, Folding, UV coating
Tags and Lables
Label stock coating lines, Conversion lines, Slider, Sheeters
Textiles and Woven's
Carding Wrapping, Sterner, Inspection
Plastic Moulding
Thermo – forming, Vacuum forming, Remoulding, Injection moulding, Blow moulding, Blow moulding, GRP, Extruder plastic & sectors
Pharma
Bottle cleaning, Tablet wrapping, Foam – fill seal, Steri – need packing
Automobiles and Appliances
Printing and Spraying

 

Static Eliminators Bars


Ideal for equipments and replacement of ineffective bars
Digital systems high performance bar utilizes advanced electro-static technology to eliminate costly static electricity problems comparable with most power supplies from 7 kilo-vats. Digital Systems lionizing bars effectively eliminates positive and negative static charges that interface with product quality and production speeds, while decreasing downtime and rejects

 

Other advantages and features are
■ Delivers high positive ion output with an effective static eliminator range of 2 inches or greater from target source.
■ Compact design allows for operation in areas where space is limited
■ Durable bar constructed of industrial grade extruded with plastic
■ Stay-Sharp emitters, No deterioration in performance due to emitters Erosion. Emitters at 3.5 pitch for intense field of lionization, allowing the bar to be operated at lower voltage with increase safety and reliability.
■ Economical to operate. Easy to install and maintain. Long life.
■ User digital systems high quality power supply, which can run two bars for multiple bar or multiple machine installation.
■ High effectiveness and economy for Packaging Machines, Printers, Converting, Extruding, and Material Handling operations.